O. Reg. 74/05: Sheet Metal Worker

 

ontario regulation 74/05

made under the

Trades Qualification and Apprenticeship Act

Made: March 2, 2005
Filed: March 4, 2005
Printed in The Ontario Gazette: March 19, 2005

Amending Reg. 1077 of R.R.O. 1990

(Sheet Metal Worker)

1. Section 5 of Regulation 1077 of the Revised Regulations of Ontario, 1990 is amended by striking out “or its equivalent for journeymen” in the portion after clause (e) and substituting “or its equivalent for journeypersons”.

2. Section 6 of the Regulation is revoked and the following substituted:

6. The number of apprentices who may be employed by an employer in the certified trade shall not exceed,

(a) where the employer is a journeyperson in the trade, one apprentice plus an additional apprentice for every three journeypersons employed by that employer in the trade and with whom the apprentice is working; and

(b) where the employer is not a journeyperson in the trade, one apprentice for the first journeyperson employed by the employer plus an additional apprentice for each additional three journeypersons employed by that employer in the trade and with whom the apprentice is working.

3. Clause 9 (b) of the Regulation is amended by striking out “as a journeyman in Ontario” and substituting “as a journeyperson in Ontario”.